One of many responsibilities involved with buying a new pinball machine is knowing the manner in which you is going to be transporting it without damaging it. If you’re going to be paying out a significant wad of cash to acquire a pinball machine, it’s recommended to learn to move it from point A to point B and still keep it in the same condition it was when it started its journey.
Firstly, and possibly most obviously, you’re going to require a vehicle that’s large enough to carry it. It can be a van, truck, or trailer but it’s going to need space to carry a system that, when folded down will measure 76cm wide, 76cm tall and 140cm deep.
Never make an effort to transport a pinball machine in its fully assembled configuration – like that lies heartbreak all round.
Before attempting to put the pinball machine in your car or truck, you first have to fold down the headboard. Arcade games for sale The majority of the recently manufactured pinball machines and by that I’m speaing frankly about the ones that were produced from around 1980 onwards, are manufactured with hinges to permit the headboard to be folded. Otherwise, your pinball machine can have a headboard that is bolted into place.
To get at the bolts on an older pinball machine you must remove the backing panel. When you undo the bolts you’ll also need to unplug the connectors that run-down in to the box. If you’re focused on remembering where these connectors go, it could be recommended to label them.
After the headboard has been folded on top of the machine, you must remove the pinball machine legs. While removing the legs, be sure you take note of the leading legs and back legs to prevent confusion when reattaching them when you yourself have reached your destination. With some makes of pinball machine, the legs will be the same length front and back which makes it difficult to tell them apart. Others, such as for instance Sega pinball machines, the legs are longer at the trunk than the front – easier to tell which goes where.
Ensure you have removed the balls from the equipment, you do not want them bouncing around everywhere in transit. Also, make sure the coin return door has been secured if you had opened it while undoing the legs.
Loading the pinball machine into a vehicle is just a two-person job. Simply load one end (front first usually works best) onto the tray and then slide it in. Because you’ve folded the headboard down it will most likely be lying through to the leading end of the table. Loading the pinball machine front first will put the heavy end closest to the vehicle’s cabin and will prevent many potential movement. Make certain the equipment is securely tied down with straps and you’re in your way.
When you’ve arrived at your destination, it’s usually recommended to slide the equipment halfway from the vehicle, attaching the legs to 1 end before sliding it out the remaining portion of the way and attaching one other legs. After the pinball machine is in place, reassemble the headboard and you’re ready to take pleasure from your brand-new pinball machine.